Well-designed On Grid Solar Power Plant - Solar Panel – Xinneng

Short Description:

Product Detail

Product Tags

Feedback (2)

With our leading technology also as our spirit of innovation,mutual cooperation, benefits and development, we are going to build a prosperous future jointly with your esteemed company for Cost To Install Solar Panels On House, Average Cost Of Solar, Off Grid Solar Generator, Never-ending improvement and striving for 0% deficiency are our two main quality policies. Should you need anything, don't hesitate to contact us.

Well-designed On Grid Solar Power Plant - Solar Panel – Xinneng Detail:

Product Introduction

For over 10 years we have been producing quality designed and built cost effective solar panels that have been sold all over the globe.

Our panels are made of tempered glass with high light transmittance,EVA,solar cell,backplane, aluminum alloy, junction Box, Silica gel.

Solar cells, also known as “solar chips” or “photocells”, are photoelectric semiconductor sheets that use sunlight to directly generate electricity. Single solar cells cannot be used directly as power sources. As a power source, several single solar cells must be connected in series, connected in parallel and tightly sealed into components.

Solar panels (also called solar cell modules) are assembled by multiple solar cells, which are the core part of the solar power system and the most important part of the solar power system.

We guarantee our panels for 25 years.

Our products are exported to Europe,Middle East,Africa,South America and other Asia countries.

Solar panel composition and functions

(1) Tempered glass: Its function is to protect the main body of power generation (such as cell) , and the selection of light transmission is required:The light transmittance must be high (generally above 91%) ; super white tempered treatment.

(2) EVA: Used to bond and fix the tempered glass and the main body of power generation (cell) .

(3) Cells: The main function is to generate electricity.

(4) Backplane: Function, sealing, insulating and waterproof.

(5) Aluminum alloy: protect the laminate, play a certain role of sealing and supporting.

(6) Junction box: protect the entire power generation system and act as a current transfer station.

(7) Silica gel: sealing effect

Our solar panels are divided into monocrystalline silicon solar panels and polycrystalline silicon solar panels. The photoelectric conversion efficiency of monocrystalline silicon solar panels is higher than that of polycrystalline silicon solar panels. The voltage and wattage of the solar panel can be customized, usually from 5watt to 300watt. The price of solar panels is calculated per watt.

Types of solar panels

Monocrystalline solar panels

The photoelectric conversion efficiency of monocrystalline silicon solar panels is about 15%, and the highest is 24%. This is the highest photoelectric conversion efficiency of all types of solar panels, but the production cost is so large that it cannot be widely and widely used. To use. Since monocrystalline silicon is generally encapsulated with toughened glass and waterproof resin, it is durable and has a service life of up to 15 years, and up to 25 years.

Polycrystalline silicon solar panel

The production process of polycrystalline silicon solar panels is similar to that of monocrystalline silicon solar panels, but the photoelectric conversion efficiency of polycrystalline silicon solar panels has to be reduced a lot, and its photoelectric conversion efficiency is about 12% (on July 1, 2004, Japan Sharp’s efficiency is 14.8%. The world’s highest efficiency polysilicon solar panel). In terms of production cost, it is cheaper than monocrystalline silicon solar panel, the material is simple to manufacture, it saves power consumption, and the total production cost is lower, so it has been developed in a large amount. In addition, the service life of polycrystalline silicon solar panels is shorter than that of monocrystalline silicon solar panels. In terms of cost performance, monocrystalline silicon solar panels are slightly better.

For over 10 years we have been producing quality designed and built cost effective solar panels that have been sold all over the globe.

Poly 60 Whole Cells

Moduel	SZ275W-P60	SZ280W-P60	SZ285W-P60
Maximum Power at STC (Pmax)	275W	280W	285W
Optimum Operating Voltage (Vmp)	31.4V	31.6 V	31.7 V
Optimum Operating Current (Imp)	8.76 A	8.86 A	9.00 A
Open Circuit Voltage(Voc)	38.1V	38.5 V	38.9 V
Short Circuit Current(Isc)	9.27A	9.38 A	9.46A
Module Efficiency	16.8%	17.1%	17.4%
Operating Module Temperature	-40 °C to +85 °C
Maximum System Voltage	1000/1500 V DC (IEC)
Maximum Series Fuse Rating	20 A
Power Tolerance	0~+5W
Standard Test Condition(STC)	lrradiance 1000 W/m 2 , module temperature 25 °C, AM=1.5;Tolerances of Pmax, Voc and Isc are all within +/- 5%.

Mono 60 Whole Cells

Moduel	SZ305W-M60	SZ310W-M60	SZ315W-M60
Maximum Power at STC (Pmax)	305W	310W	315W
Optimum Operating Voltage (Vmp)	32.8V	33.1 V	33.4 V
Optimum Operating Current (Imp)	9.3 A	9.37 A	9.43 A
Open Circuit Voltage(Voc)	39.8V	40.2 V	40.6V
Short Circuit Current(Isc)	9.8A	9.87A	9.92A
Module Efficiency	18.6%	18.9%	19.2%
Operating Module Temperature	-40 °C to +85 °C
Maximum System Voltage	1000/1500 V DC (IEC)
Maximum Series Fuse Rating	20 A
Power Tolerance	0~+5W
Standard Test Condition(STC)	Standard Test Condition(STC) lrradiance 1000 W/m 2 , module temperature 25 °C, AM=1.5;Tolerances of Pmax, Voc and Isc are all within +/- 5%.